Sort by:
This thoughtfully crafted holder is made from Walnut wood and stained black and allows you to easily and safely store your knives up to 210mm on a benchtop with a small footprint, whilst being able to see the blades through the open-sided design.
Before purchasing please ensure your knives will fit with the provided dimensions. Knives that are thicker, longer, or taller than the provided dimensions will not fit in the holder. Chefs Edge will not accept responsibility if your knives don't fit in the holder. *Holder will not fit Deba, Cleaver, or any other non-traditionally shaped blades*
Inner void for knife: 4mm wide x 65mm deep x 225mm high.
Total exterior measurements: 80mm wide x 130mm deep x 265mm high.
Specifications
| Style: |
Gyuto |
| Blade Length: | 240mm |
| Overall Length: | 400mm |
| Weight: | 180g |
| Blade Height @ Heel: | 48mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 2mm |
| Blade Material: | Ginsan Core, Migaki Soft Stainless Clad |
| Handle Material: | Octagon Oak |
*Please ensure the correct sized saya is chosen before purchasing, a list of knives that fit this saya is linked below, Chefs Edge is not responsible if the wrong sized saya is selected*
| Saya Style: | Petty with pin |
| Opening Height: | 26mm |
| Internal Length: |
To suit a Petty 130mm or 150mm |
| External Length |
185mm |
| Weight: |
24g |
| Saya Material: | Birch Wood |
| Knives this saya suits | Click here to view knives |
Specifications
| Material: | Stainless Steel, Timber |
| Length: | mm |
| Weight | g |
Specifications
| Style: | Gyuto |
| Blade Length: | 210mm |
| Overall Length: | 363mm |
| Weight: | 164g |
| Blade Height @ Heel: | 54mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 2mm |
| Spine Thickness @ Mid: | 1.8mm |
| Spine Thickness 1cm from tip: | 0.8mm |
| Blade Material: | Shirogami 2 with Damascus Clad |
| Handle Material: | Octagon Walnut w/Pakkawood Bolster |
| HRC: | 62 |
Specifications
| Style: | Petty |
| Blade Length: | 125mm |
| Overall Length: | 235mm |
| Weight: | 50g |
| Blade Height: | 27mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 1.8mm |
| Spine Thickness @ Mid: | 1.8mm |
| Spine Thickness 1cm from tip: | 0.9m |
| Blade Material: | SLD Stainless Steel |
| Handle Material: | Oval Walnut |
| HRC: | ~60 |
Specifications
| Style: | Brass, Magnolia Handle |
| Length: | 175mm |
| Origin: | Japan |
Specifications
| Style: | Gyuto |
| Blade Length: | 210mm |
| Weight: | 150grms |
| Blade Material: | VG10 Core, Fluorine Resin Non Stick Coated Stainless Clad |
| Handle Material: | Wenge/Buffalo Horn |
| HRC: | 60-61 |
Accessories Information
| Style: | Gloss Silver |
| Length: | 195mm |
| Construction: | Stainless Steel |
Specifications
| Style: | Gyuto |
| Blade Length: | 270mm |
| Overall Length: | 407mm |
| Weight: | 275g |
| Blade Height @ Heel: | 54mm |
| Bevel: | Double Bevel (Sharpened 70/30) |
| Spine Thickness @ Mid: | 2mm |
| Blade Material: | AUS8 Core, Stainless Clad |
| Handle Material: | Full Tang Western |
Accessories Information
Heavy duty, sturdy rubber-based whetstone holder.
– Sturdy stainless steel and rubber construction
– Heavy Duty Locking Screw
– Holds stones from 73mm to 218mm in length
– Weight: 577g
The Black Magnetic Knife Holder is a minimal and elegant knife storage solution for those who may not have room for bulky knife blocks that take up vital bench space.
– Walnut timber construction
– Strong adhesive strips runs along entire back of holder, or hang with 2 screws
– Powerful Neodymium Magnets
– 40cm L x 2cm W x 6.5cm H
- Sorry, knife not included
*Chefs Edge is not liable for any damage caused to knives while using the magnetic holder*
This Slicer by Benriner is exactly what you would expect from a high-quality Japanese mandoline. Crafted with stainless steel blades that are extremely sharp, watch your fingers!
Total width: 160mm
Total length: 325mm
This mandoline is lightweight and adjustable, we will perfectly slice, cut, and julienne vegetables for salads with precision.
*Available to Australian customers only*
Specifications
| Style: | Gyuto |
| Blade Length: | 210mm |
| Weight: | 185g |
| Blade Material: | AUS10 w/Stainless Clad |
| Handle Material: | Pakkawood w/stainless bolster |
| HRC: | 58-59 |
*Available to Australian customers only*
Specifications
| Style: | Santoku |
| Blade Length: | 165mm |
| Weight: | 165g |
| Blade Material: | AUS10 w/Stainless Clad |
| Handle Material: | Pakkawood w/stainless bolster |
| HRC: | 58-59 |