88 products
88 products
Sort by:
Specifications
Style: | Gyuto |
Blade Length: | 210mm |
Overall Length: | 340mm |
Weight: | 147g |
Blade Height: | 47mm |
Bevel: | Double Bevel |
Spine Thickness @ Heel: | 2mm |
Spine Thickness @ Mid: | 2mm |
Spine Thickness 1cm from tip: | 0.9m |
Blade Material: | SLD Stainless Steel |
Handle Material: | Ambidextrous Walnut Hybrid |
HRC: | ~60 |
Specifications
Style: | Petty |
Blade Length: | 125mm |
Overall Length: | 235mm |
Weight: | 50g |
Blade Height: | 27mm |
Bevel: | Double Bevel |
Spine Thickness @ Heel: | 1.8mm |
Spine Thickness @ Mid: | 1.8mm |
Spine Thickness 1cm from tip: | 0.9m |
Blade Material: | SLD Stainless Steel |
Handle Material: | Oval Walnut |
HRC: | ~60 |
Specifications
Style: | Santoku |
Blade Length: | 170mm |
Overall Length: | 305mm |
Weight: | 126g |
Blade Height: | 42mm |
Bevel: | Double Bevel |
Spine Thickness @ Heel: | 2mm |
Spine Thickness @ Mid: | 2mm |
Spine Thickness 1cm from tip: | 0.9m |
Blade Material: | SLD Stainless Steel |
Handle Material: | Oval Walnut |
HRC: | ~60 |
Accessories Information
Supreme whetstones made by Suehiro Japan. The Debado are splash and go stone, the SNE1200 Grit is considered a mid-grit stone and is an essential step in your knife sharpening process. These stones are much harder than the usual Suehiro stones, resulting in slow wear and minimal dishing.
Accessories Information
The Knife Maintenance Bundle was designed to offer incredible value for money with a 1000/3000 grit whetstone with base, guide clip and nagura stone for achieving sharp edges on your knives, and a 10" black ceramic steel honing rod to maintain these edges between sharpening.
The high-grit ceramic honing rod is an essential tool for maintaining the sharpness of your Japanese knives.
With correct use, it can double your period between sharpening, allowing for easy maintenance of your sharp whetstone edges.
A high grade ceramic is wrapped around a rubber shock resistant core, protecting the ceramic from breaking if dropped.
Specifications
Style: | Petty |
Blade Length: | 150mm |
Overall Length: | 260mm |
Weight: | 82g |
Blade Height @ Heel: | 27mm |
Bevel: | Double Bevel |
Spine Thickness @ Mid: | 1.7mm |
Blade Material: | VG10 Core, Stainless Clad |
Handle Material: | Full Tang Western |
Accessories Information
Includes Large & Small Quenelle Spoons, Plating Spatula, Plating Tweezer Bundle, Plating Spoon, Saucing Spoon, Fishbone Tweezers and Canvas Tool Pouch
Specifications
Style: | Gloss & Brushed Silver |
Construction: | Stainless Steel |
Accessories Information
The Knife Maintenance Bundle was designed to offer incredible value for money with a 1000/3000 grit whetstone with base, guide clip and nagura stone for achieving sharp edges on your knives, and a 10" black ceramic steel honing rod to maintain these edges between sharpening.
The high-grit ceramic honing rod is an essential tool for maintaining the sharpness of your Japanese knives.
With correct use, it can double your period between sharpening, allowing for easy maintenance of your sharp whetstone edges.
A high grade ceramic is wrapped around a rubber shock resistant core, protecting the ceramic from breaking if dropped.
Food-safe Camellia Oil is the most natural way to ensure carbon steel knives do not rust during storage. Camellia is a very light oil, and when applied creates a barrier between your knife and moisture which may rust or damage your blade. It does not affect glue or finishes on your knives.
This thoughtfully crafted holder is made from Walnut wood and allows you to easily and safely store your knives on a benchtop with a small footprint, whilst being able to see the blades through the open-sided design.
Before purchasing please ensure your knives will fit with the provided dimensions. Knives that are thicker, longer, or taller than the provided dimensions will not fit in the holder. Chefs Edge will not accept responsibility if your knives don't fit in the holder.
Inner void for knife: 4mm wide x 65mm deep x 225mm high.
Total exterior measurements: 80mm wide x 130mm deep x 265mm high.
Accessories Information
Includes Large & Small Quenelle Spoons, Plating Spatula, Plating Tweezer Bundle, Plating Spoon, Saucing Spoon, Fishbone Tweezers
Specifications
Style: | Gloss & Brushed Silver |
Construction: | Stainless Steel |
Accessories Information
Includes Large & Small Quenelle Spoons, Plating Spatula, Plating Tweezer Bundle, Plating Spoon, Saucing Spoon, Fishbone Tweezers and Waxed Canvas Tool Pouch.
Specifications
Style: | Gloss & Brushed Silver |
Construction: | Stainless Steel |
Specifications
Style: | Deba |
Blade Length: | 160mm |
Overall Length: | 297mm |
Weight: | 180g |
Blade Height: | 46mm |
Bevel: | Single Bevel |
Spine Thickness @ Heel: | 4mm |
Spine Thickness @ Mid: | 4mm |
Spine Thickness 1cm from tip: | 2mm |
Blade Material: | SLD Stainless Steel |
Handle Material: | Ambidextrous Walnut Hybrid |
HRC: | ~60 |
Specifications
Style: | Bread Knife |
Blade Length: | 236mm |
Overall Length: | 375mm |
Weight: | 120g |
Blade Height: | 26mm |
Bevel: | Double Bevel |
Blade Material: | SLD Stainless Steel |
Handle Material: | Oval Walnut |
HRC: | ~60 |
*Please select the correct handle size before confirming your order.*
Chefs Edge will not accept responsibility if the wrong-sized handle is selected.
Fancy up your kitchen knives with a custom handle! This stunning Octagon handle is crafted from African Blackwood and Black Buffalo Horn, and is suitable for Gyuto 210mm blades. African Blackwood is preferred over Ebony due to it's high toughness, whereas Ebony has a tendency to crack during production.
Handles are made from natural timber and as such can vary in tone, grain, and general appearance. Some are lighter/darker than others.
Specifications
*Bundle also includes Edge Guards, Black Habitat 6pc Knife Roll
Style: | Petty, Santoku, Gyuto, Bread Knife |
Blade Length: | 125mm, 170mm, 210mm, 230mm |
Handle Material: | Oval Oak |
Steel: | SLD Stainless Steel |
HRC: | ~60 |
Specifications
Style: | Deba |
Blade Length: | 150mm |
Overall Length: | 280mm |
Weight: | 263g |
Blade Height @ Heel: | 43mm |
Bevel: | Single Bevel |
Spine Thickness @ Mid: | 3.5mm |
Blade Material: | AUS8 Core, Stainless Clad |
Handle Material: | Full Tang Western |
These Naniwa are excellent bang for buck, albeit being a little smaller than traditional stones. Great for touching up of Petty/Bunka/Nakiri size blades and smaller Gyuto.
- Medium-Soft
- Whetstone grit #1000
- Whetstone Size 175×55×15mm