Sort by:
84 products
84 products
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #1000 (Use in the early stages of sharpening)
Weight: 668g
Dimensions: 210 x 70 x 15mm
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #5000 Fine (For Honing, or for edge polishing, use after the 1000)
Weight: 668g
Dimensions: 210 x 70 x 15mm
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #1000 & #5000 (The ideal 2-step progression)
Accessories Information
Includes
- Yoshoku 1000/6000 Grit Deluxe Combination Stone (soak for 5-10 minutes before use)
- Approx. stone dimensions: 180mm x 60mm x 30mm
- Guide Clip (Consider applying masking tape to the knife to reduce potential risk of scratching)
- Nagura Stone (flattening stone)
- Bamboo holder with rubber nonslip base
- Best paired with a lapping stone/plate for flatting between use
- Entry level stone
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
Accessories Information
Includes
- Yoshoku 1000/3000 Grit Deluxe Combination Stone (soak for 5-10minutes before use)
- Approx. stone dimensions: 180mm x 60mm x 30mm
- Guide Clip (Consider applying masking tape to the knife to reduce potential risk of scratching)
- Nagura Stone (flattening stone)
- Bamboo holder with rubber nonslip base
- Suitable for VG10, AUS8 & softer stainless applications
- Best paired with a lapping stone/plate for flatting between use
- Entry level stone
These Naniwa are excellent bang for buck, albeit being a little smaller than traditional stones. Great for touching up of Petty/Bunka/Nakiri size blades and smaller Gyuto.
- Medium-Soft
- Whetstone grit ＃1000
- Whetstone Size 175×55×15mm
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
Accessories Information
Heavy duty, sturdy rubber-based whetstone holder.
– Sturdy stainless steel and rubber construction
– Heavy Duty Locking Screw
– Holds stones from 73mm to 218mm in length
– Weight: 577g
The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.
Dimensions of stone - 210 x 70 x 20
Made In Japan
Accessories Information
Suehiro is Japanese-made and some of the most popular in the market due to their consistent quality and excellent performance. We find the stones to have excellent feedback and even wear.
– Combination 1000/6000 grit for dull knives or moderate/small chip repair followed by polishing
– Includes a sturdy plastic base with rubber feet
– Includes small Nagura stone
- 175mm x 60mm x ~11-14mm (per grit)
– 950g weight
Accessories Information
A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.
The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.
Dimensions of stone - 210 x 70 x 20
Made In Japan
The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.
Dimensions of stone - 210 x 70 x 20
Made In Japan
When it comes to sharpening, stability makes all the difference. You could wrestle with a stone that moves around on you, or you could use this tool to keep it secure, making the process safer and more enjoyable.
This sink bridge takes sharpening setups to the next level. It offers an easy way to access water while keeping cleanup simple. With adjustable grips to fit nearly any sink and hold stones of all sizes, it’s a versatile and reliable solution for any sharpening task.
Width: 83mm
Smallest and largest sink: 280mm to 430mm
Maximum stone length : 215mm
The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.
Dimensions of stone - 210 x 70 x 20
Made In Japan
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #120 Very Coarse (Only for larger repairs)
Weight:
Dimensions:
Accessories Information
The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.
Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.
- Overall size: 210 x 70 x 10mm
- Abrasive layer: 5mm
- Mesh: 10000
- 360g
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #8000 Very Fine (For honing or edge polishing, use after the 5000)
Weight:
Dimensions:
Accessories Information
A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.
An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.
Dimensions of stone - 210 x 70 x 10mm
Made In Japan
Chef's Edge
We pride ourselves on offering an unparalleled selection of Japanese knives. From the versatile Gyuto and the precise Santoku to specialized knives like the Nakiri and Yanagiba, each knife is handpicked for its quality and performance.