Wholesale
Sort by:
Canvas pouch with velcro straps for storing up to 10 chef tools,
Not for storing knives see photos.
Interior storage space: 350mm wide x 245mm tall
Pocket depth: 110mm
Smallest pocket width approx: 19mm
Largest pocket width approx: 42mm
*Chef tools not included
Accessories Information
| Style: | Gloss Black |
| Length: | 195mm |
| Construction: | Stainless Steel |
Accessories Information
– Plastic blade guard with felt lining
– 30cm length
– Most suited to 27/30cm chef knives
Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.
*Logo may vary from item pictured*
Lightweight heavy duty PVC pouch with 2 tie up straps for storing up to 10 chef tools,
Not for storing knives.
Interior storage space: 370mm wide x 245mm tall
Pocket depth: 110mm
Smallest pocket width approx: 22mm
Largest pocket width approx: 42mm
*Chef tools not included
Specifications
| Material: | Stainless Steel Shaft, Plastic Handle |
| Zestable Length: | 185mm |
| Weight | 99g |
Accessories Information
| Style: | Offset Plating Tweezer |
| Length: | 200mm |
| Construction: | Stainless Steel |
Specifications
| Style: | Petty |
| Blade Length: | 135mm |
| Overall Length: | 270mm |
| Weight: | 74g |
| Blade Height @ Heel: | 28mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 1.9mm |
| Blade Material: | Ginsan Core, Nashiji Soft Stainless Clad |
| Handle Material: | Octagon Oak |
| HRC: | 61 |
Accessories Information
| Style: | Gloss Black |
| Length: | 195mm |
| Construction: | Stainless Steel |
*Knife Not Included* This thoughtfully crafted holder is made from Walnut wood and allows you to easily and safely store your knives on a benchtop with a small footprint, whilst being able to see the blades through the open-sided design.
Before purchasing please ensure your knives will fit with the provided dimensions. Knives that are thicker, longer, or taller than the provided dimensions will not fit in the holder. Chefs Edge will not accept responsibility if your knives don't fit in the holder.
Inner void for knife: 4mm wide x 65mm deep x 225mm high.
Total exterior measurements: 80mm wide x 130mm deep x 265mm high.
Specifications
| Material: | Stainless Steel, Timber |
| Length: | mm |
| Weight | g |
165mm VG10 Core Black Damascus Clad Bunka Knife
Specifications
| Style: | Bunka |
| Blade Length: | 165mm |
| Weight: | 150g |
| Bevel: | Double Bevel |
| Blade Material: | VG10 Core Black Damascus Clad |
| Handle Material: | Octagon Pakkawood w/white spacer |
| HRC | 61 |
Specifications
| Style: |
Gyuto |
| Blade Length: | 200mm |
| Blade Height @ Heel: | 47mm |
| Blade Thickness @ Mid: | 1.9mm |
| Weight: | 175g |
| Bevel: | Double Bevel |
| Blade Material: | VG10 Core Black Damascus Clad |
| Handle Material: | Octagon Pakkawood w/white spacer |
| HRC | 61 |
*Available to Australian customers only*
Specifications
| Style: | Boning |
| Blade Length: | 165mm |
| Weight: | 140g |
| Blade Material: | AUS10 w/Stainless Clad |
| Handle Material: | Pakkawood w/stainless bolster |
| HRC: | 58-59 |
Accessories Information
- Guide Clip
- Clip to the spine of your knife to maintain a consistent sharpening angle
This thoughtfully crafted holder is made from Walnut wood and stained black and allows you to easily and safely store your knives up to 210mm on a benchtop with a small footprint, whilst being able to see the blades through the open-sided design.
Before purchasing please ensure your knives will fit with the provided dimensions. Knives that are thicker, longer, or taller than the provided dimensions will not fit in the holder. Chefs Edge will not accept responsibility if your knives don't fit in the holder. *Holder will not fit Deba, Cleaver, or any other non-traditionally shaped blades*
Inner void for knife: 4mm wide x 65mm deep x 225mm high.
Total exterior measurements: 80mm wide x 130mm deep x 265mm high.