Accessories Information

– Plastic blade guard with felt lining
– 16cm length, 3.2cm height
– Most suited to 12-15cm chef knives

Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.  

*Logo may vary from item pictured*

Food-safe Camellia Oil is the most natural way to ensure carbon steel knives do not rust during storage. Camellia is a very light oil, and when applied creates a barrier between your knife and moisture which may rust or damage your blade. It does not affect glue or finishes on your knives.

Accessories Information

– Plastic blade guard with felt lining
– 27cm length, 5.5cm height
– Most suited to 24cm chef knives

Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.  

*Logo may vary from item pictured*

Accessories Information

– Plastic blade guard with felt lining
– 24cm length, 5.5cm height
– Most suited to 21cm chef knives

Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.  

*Logo may vary from item pictured*

Accessories Information

Suehiro is Japanese-made and some of the most popular in the market due to their consistent quality and excellent performance. We find the stones to have excellent feedback and even wear.
– Combination 1000/6000 grit for dull knives or moderate/small chip repair followed by polishing
– Includes a sturdy plastic base with rubber feet
– Includes small Nagura stone

-  175mm x 60mm x ~11-14mm (per grit)
– 950g weight

Accessories Information

– Plastic blade guard with felt lining
– 30cm length, 5cm height
– Most suited to 27/30cm chef knives

Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.  

*Logo may vary from item pictured*

Accessories Information

Porter Large Double-Sided Strop, the essential last step of deburring the edge of your knife to ensure maximum sharpness.

– Dual Sided Leather
– Shaped handle for ease of use
– Green Compound included
– 330mm Leather Length
– Tapered end

If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time. 

Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value. 

Grit: #1000 & #5000 (The ideal 2-step progression) 

Accessories Information

Heavy duty, sturdy rubber-based whetstone holder. 
– Sturdy stainless steel and rubber construction 
– Heavy Duty Locking Screw
– Holds stones from 73mm to 218mm in length

– Weight: 577g

If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time. 

Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value. 

Grit: #1000 (Use in the early stages of sharpening)

Weight: 668g

Dimensions: 210 x 70 x 15mm 

Accessories Information

A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.  

Accessories Information

A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.  

The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.

Dimensions of stone - 210 x 70 x 20

Made In Japan

If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time. 

Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value. 

Grit: #8000 Very Fine (For honing or edge polishing, use after the 5000)

Weight:

Dimensions:  

If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time. 

Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value. 

Grit: #120 Very Coarse (Only for larger repairs)

Weight:

Dimensions:  

An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.

Dimensions of stone - 210 x 70 x 10mm

Made In Japan

If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time. 

Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value. 

Grit: #5000 Fine (For Honing, or for edge polishing, use after the 1000)

Weight: 668g

Dimensions: 210 x 70 x 15mm

Accessories Information

The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.  

• Overall size: 210 x 70 x 10mm
• Micron: 2
• Mesh: 6000
  
• No Case Included

The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.

Dimensions of stone - 210 x 70 x 20

Made In Japan

These Naniwa are excellent bang for buck, albeit being a little smaller than traditional stones. Great for touching up of Petty/Bunka/Nakiri size blades and smaller Gyuto.

• Medium-Soft
• Whetstone grit ＃1000
• Whetstone Size 175×55×15mm
  

An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.

Dimensions of stone - 210 x 70 x 10mm

Made In Japan