Sort by:
1496 products
1496 products
Knife Information
1894- Mr. Tasaburo Shigematsu, a hardware wholesaler, introduced a new pocket knife with its blade and sheath folded by installing a small handle “Chikiri (tail)” on the blade, while inspired by the knife he brought back from Kagoshima.
He named it “Higonokami Knife” because many of his customers were in Kumamoto area (formally Higo country), which turned out to dramatically increase his sales. The blades have gradually changed their shapes. Unlike single-edged knives, the double-edged blades (V-shaped cross section) were in those days considered common. The earlier blades had a sharper tip (shape of a bamboo leaf), but now they have square shapes. The sheaths had a vertically folding style and a cross folding style, now the vertical one has to be custom made.
In 1911, at the First Kobe Export Articles Competitive Exhibition, Crown Prince (later Emperor Taisho) liked Higonokami on display very much and bought one, which is said to have helped its fame further spread.
The Higonikami is a fantastic traditional utility knife at a low cost.
Specifications
Style: | Higonokami |
Blade Length: | 73mm |
Weight: | 44g |
Bevel: | Double Bevel |
Blade Material: | Warikomi VG10 Stainless Steel |
Handle Material: | Stainless Steel |
Specifications
Style: | Petty |
Blade Length: | 130mm |
Overall Length: | 240mm |
Weight: | 83g |
Blade Height @ Heel: | 31mm |
Bevel: | Double Bevel |
Spine Thickness @ Mid: | 2mm |
Blade Material: | Ginsan Stainless Steel |
Handle Material: | Octagon Dyed Maple |
HRC: | ~61 |
165mm Shirogami 2 with Damascus Clad Bunka Knife
Specifications
Style: | Bunka |
Blade Length: | 165mm |
Overall Length: | 303mm |
Weight: | 121g |
Blade Height @ Heel: | 48mm |
Bevel: | Double Bevel |
Spine Thickness @ Heel: | 1.9mm |
Spine Thickness @ Mid: | 1.5mm |
Spine Thickness 1cm from tip: | 0.7mm |
Blade Material: | Shirogami 2 with Damascus Clad |
Handle Material: | Octagon Walnut w/Pakkawood Bolster |
HRC: | 62 |
Specifications
Style: | Gyuto |
Blade Length: | 210mm |
Overall Length: | 365mm |
Weight: | 146g |
Blade Height @ Heel: | 52mm |
Bevel: | Double Bevel |
Spine Thickness @ Heel: | 2.9mm |
Spine Thickness @ Mid: | 1.9mm |
Spine Thickness 1cm from tip: | 1.2mm |
Blade Material: | Blue Super Core, Stainless Clad, Kurouchi Finish |
Handle Material: | Octagon Walnut w/Pakkawood Bolster |
HRC: | ~63 |
Accessory Information
The Atoma Diamond Lapping Plates by Tsuboman Japan are widely recognised as the superior solution for flattening your whetstones. Strong, sturdy, and weighing in at just shy of 700g, these will make light work of even the hardest stones.
– Low 140 Grit for fast removal of stone surface
– Integrated handle makes flattening incredibly fast & easy
– Replaceable abrasive sheet
- 7.5cm x 21cm plate size
Specifications
Style: | Gyuto |
Blade Length: | 180mm |
Overall Length: | 350mm |
Weight: | 158g |
Blade Height @ Heel: | 46mm |
Bevel: | Double Bevel |
Spine Thickness @ Mid: | 2mm |
Blade Material: | Ginsan Core, Migaki Soft Stainless Clad |
Handle Material: | Octagon Oak |
Accessory Information
The Atoma Diamond Lapping Plates by Tsuboman Japan are widely recognised as the superior solution for flattening your whetstones. Strong, sturdy, and weighing in at 600g, these will make light work of even the hardest stones.
– Low 140 Grit for very fast removal of stone surface
– Replaceable abrasive sheet
Accessories Information
Includes Large & Small Quenelle Spoons, Plating Spatula, Plating Tweezer Bundle, Plating Spoon, Saucing Spoon, Fishbone Tweezers
Specifications
Style: | Gloss & Brushed Silver |
Construction: | Stainless Steel |
Specifications
Style: | Gyuto |
Blade Length: | 210mm |
Overall Length: | 360mm |
Weight: | 148g |
Blade Height @ Heel: | 47mm |
Bevel: | Double Bevel |
Spine Thickness @ Heel: | 3.6mm |
Spine Thickness @ Mid: | 1.9mm |
Spine Thickness 1cm from tip: | 0.6mm |
Blade Material: | SKD Core, Stainless Tsuchime Cladding |
Handle Material: | Burnt Chestnut w/Buffalo Horn Bolster |
HRC: | 63 |
Specifications
Style: | Nakiri |
Blade Length: | 165mm |
Overall Length: | 305mm |
Weight: | 147g |
Blade Height @ Heel: | 51mm |
Bevel: | Double Bevel |
Spine Thickness @ Heel: | 2.9mm |
Spine Thickness @ Mid: | 1.9mm |
Spine Thickness 1cm from tip: | 1.2mm |
Blade Material: | Blue 2 Core, Carbon Clad, Kurouchi Finish |
Handle Material: | Octagon Walnut w/Pakkawood Bolster |
HRC: | ~63 |
Specifications
Style: | Gyuto |
Blade Length: | 210mm |
Overall Length: | 360mm |
Weight: | 212g |
Blade Height @ Heel: | 55mm |
Bevel: | Double Bevel |
Spine Thickness @ Heel: | 3.3mm |
Spine Thickness @ Mid: | 1.9mm |
Blade Material: | Shirogami 1 Core, Soft Iron Clad |
Handle Material: | Octagon Rosewood |
HRC: | ~62 |
*Available to Australian customers only*
Specifications
Style: | Petty |
Blade Length: | 135mm |
Weight: | 90g |
Blade Material: | AUS10 w/Stainless Clad |
Handle Material: | Pakkawood w/stainless bolster |
HRC: | 58-59 |
Accessories Information
Includes
- Yoshoku 1000/3000 Grit Deluxe Combination Stone
-
- Best paired with a lapping stone/plate for flatting between use
- Entry level stone
- Guide Clip (Consider applying masking tape to the knife to reduce potential risk of scratching.)
- Nagura stone
- Camellia Oil
Food-safe Camellia Oil is the most natural way to ensure carbon steel knives do not rust during storage. Camellia is a very light oil, and when applied creates a barrier between your knife and moisture which may rust or damage your blade. It does not affect glue or finishes on your knives.
Specifications
Style: | Petty |
Blade Length: | 135mm |
Overall Length: | 260mm |
Weight: | 66g |
Blade Height @ Heel: | 31mm |
Bevel: | Double Bevel |
Spine Thickness @ Heel: | 2.1mm |
Spine Thickness @ Mid: | 1.2mm |
Spine Thickness 1cm from tip: | 0.7mm |
Blade Material: | Shirogami 2 with Damascus Clad |
Handle Material: | Octagon Walnut w/Pakkawood Bolster |
HRC: | 62 |
Specifications
Style: | Santoku |
Blade Length: | 170mm |
Overall Length: | 310mm |
Weight: | 167g |
Blade Height @ Heel: | 50mm |
Bevel: | Double Bevel |
Spine Thickness @ Mid: | 2mm |
Blade Material: | Blue 2 w/Soft Iron Clad |
Handle Material: | Octagon Bubinga |
Knife Information
1894- Mr. Tasaburo Shigematsu, a hardware wholesaler, introduced a new pocket knife with its blade and sheath folded by installing a small handle “Chikiri (tail)” on the blade, while inspired by the knife he brought back from Kagoshima.
He named it “Higonokami Knife” because many of his customers were in Kumamoto area (formally Higo country), which turned out to dramatically increase his sales. The blades have gradually changed their shapes. Unlike single-edged knives, the double-edged blades (V-shaped cross section) were in those days considered common. The earlier blades had a sharper tip (shape of a bamboo leaf), but now they have square shapes. The sheaths had a vertically folding style and a cross folding style, now the vertical one has to be custom made.
In 1911, at the First Kobe Export Articles Competitive Exhibition, Crown Prince (later Emperor Taisho) liked Higonokami on display very much and bought one, which is said to have helped its fame further spread.
The Higonikami is a fantastic traditional utility knife at a low cost.
Specifications
Style: | Higonokami |
Blade Length: | 70mm |
Weight: | 49g |
Bevel: | Double Bevel |
Blade Material: | Aogami (Blue) Steel w/Kurouchi Finish |
Handle Material: | Brass |
Specifications
*Bundle also includes Edge Guards & 1000/3000 Grit Stone, Base, Nagura, and Guide Clip
Style: | Petty, Santoku |
Blade Length: | 125mm, 170mm |
Handle Material: | Oval Oak |
Steel: | SLD Stainless Steel |
HRC: | ~60 |
165mm Blue 2 Core, Carbon Clad, Kurouchi Finish Bunka Knife.
Specifications
Style: | Bunka |
Blade Length: | 165mm |
Overall Length: | 300mm |
Weight: | 117g |
Blade Height @ Heel: | 45mm |
Bevel: | Double Bevel |
Spine Thickness @ Heel: | 2.6mm |
Spine Thickness @ Mid: | 1.8mm |
Spine Thickness 1cm from tip: | 0.8mm |
Blade Material: | Blue 2 Core, Carbon Clad, Kurouchi Finish |
Handle Material: | Octagon Walnut w/Pakkawood Bolster |
HRC: | ~63 |


Hatsukokoro Kumokage Blue 2 Kurouchi Damascus Kiritsuke Sujihiki 250mm
$231.00 USD
Unit price perHatsukokoro Kumokage Blue 2 Kurouchi Damascus Kiritsuke Sujihiki 250mm
$231.00 USD
Unit price perSpecifications
Style: | Kiritsuke Sujihiki (Double Bevel) |
Blade Length: | 255mm |
Overall Length: | 410mm |
Weight: | 197g |
Blade Height @ Heel: | 40mm |
Bevel: | Double Bevel |
Spine Thickness @ Heel: | 2.7mm |
Spine Thickness @ Mid: | 2.4mm |
Spine Thickness 1cm from tip: | 1mm |
Blade Material: | Blue 2 Core (Pre-etched), Soft Iron Kurouchi Damascus Clad |
Handle Material: | Octagon Bubinga |
HRC: | 62 |
Specifications
Style: | Gyuto |
Blade Length: | 245mm |
Overall Length: | 390mm |
Weight: | 179g |
Blade Height @ Heel: | 58mm |
Bevel: | Double Bevel |
Spine Thickness @ Heel: | 3.2mm |
Spine Thickness @ Mid: | 1.5mm |
Blade Material: | Blue 2 Core, Stainless Tsuchime Clad |
Handle Material: | Octagon Rosewood |
HRC: | ~62 |
Specifications
Style: | Nakiri |
Blade Length: | 165mm |
Overall Length: | 300mm |
Weight: | 173g |
Blade Height @ Heel: | 51mm |
Bevel: | Double Bevel |
Spine Thickness @ Mid: | 1.9mm |
Blade Material: | VG10, Stainless Tsuchime Clad |
Handle Material: | Western Pakka Wood |