Sort by:
Specifications
| Style: | Nakiri |
| Blade Length: | 165mm |
| Overall Length: | 306mm |
| Weight: | 138g |
| Blade Height @ Heel: | 51mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 2.3mm |
| Spine Thickness @ Mid: | 1.3mm |
| Spine Thickness 1cm from tip: | 0.8mm |
| Blade Material: | Shirogami 2 with Damascus Clad |
| Handle Material: | Octagon Walnut w/Pakkawood Bolster |
| HRC: | 62 |
The Maple Magnetic Knife Holder is a minimal and elegant knife display and storage solution for those who may not have room for bulky knife blocks that take up vital bench space.
– Maple timber construction
– Strong adhesive strips runs along entire back of holder, or hang with 2 screws
– Powerful Neodymium Magnets
– 40cm L x 2cm W x 6.5cm H
- Knives not included
*Chefs Edge is not liable for any damage caused to knives while using the magnetic holder*
Specifications
| Style: | Santoku |
| Blade Length: | 170mm |
| Overall Length: | 297mm |
| Weight: | 152g |
| Blade Height @ Heel: | 46mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 1.6mm |
| Blade Material: | VG10 Stainless Steel, Stainless Clad |
| Handle Material: | Western Black Pakka Wood |
| HRC: | ~60 |
Includes the small brass fish scaler and matte black brushed fish bone tweezers
The 'Ever Peeler' took a lot of time and planning, after comparing over 200 types of peelers from around the world before the final design was settled on. Completely made in Japan this peeler can not only peel potatoes and carrots but is able to shred cabbage too. Crafted to have the sharpest possible blade and also durability of that sharpness has resulted in a peeler of the highest quality.
To reduce wastage the creators of the 'Ever Peeler' also made replaceable blades available so your peeler can be restored with a new blade if needed.
Specifications
| Style: | Deba |
| Blade Length: | 170mm |
| Overall Length: | 320mm |
| Weight: | 313g |
| Blade Height @ Heel: | 55mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 7mm |
| Spine Thickness @ Mid: | 7mm |
| Blade Material: | Blue 2 Core, Soft Iron Clad |
| HRC: | ~62 |
| Handle Material: | Octagon Wenge w/ Black Horn |
Specifications
| Style: | Sujihiki |
| Blade Length: | 248mm |
| Overall Length: | 400mm |
| Weight: | 153g |
| Blade Height @ Heel: | 34mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 4mm |
| Spine Thickness @ Mid: | 1.9mm |
| Blade Material: | SLD Core, Kurouchi Tsuchime Stainless Clad |
| Handle Material: | Octagon Walnut |
| HRC: | ~62-63 |
Specifications
| Style: | Bread Knife |
| Blade Length: | 236mm |
| Overall Length: | 375mm |
| Weight: | 120g |
| Blade Height: | 26mm |
| Bevel: | Double Bevel |
| Blade Material: | SLD Stainless Steel |
| Handle Material: | Oval Walnut |
| HRC: | ~60 |
Ceramics Information
Made in Japan
Set of 5 chopsticks - 22.5cm long
*Available to Australian customers only*
Specifications
| Style: | Slicer |
| Blade Length: | 240mm |
| Weight: | 170g |
| Blade Material: | AUS10 w/Stainless Clad |
| Handle Material: | Pakkawood w/stainless bolster |
| HRC: | 58-59 |
Ceramics Information
Made in Japan
Set of 5 chopsticks - 22.5cm long
Specifications
| Style: | Gyuto |
| Blade Length: | 198mm |
| Overall Length: | 343mm |
| Height @ Heel: | 46mm |
| Spine Thickness @ Mid: | 3mm |
| Weight: | 175g |
| Blade Material: | White 2 Carbon Steel core + Soft Iron Kasumi Clad |
| Handle Material: |
Dark Oak Octagon |
| HRC: | 62-63 |
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #8000 Very Fine (For honing or edge polishing, use after the 5000)
Weight:
Dimensions: